This project is an example of roof waterproofing Linden for a residential property with multiple vulnerable roof areas.
TaylorMade Waterproofing was appointed to complete targeted waterproofing across the ridgecaps, box gutters, and a flat roof section around a skylight. The skylight area required new chipboard installation before the torch-on waterproofing system could be applied.
Skylight & Residential Roof Waterproofing
Boards & 4mm Torch-On Membrane
10 Year Guarantee
3 Days
This waterproofing project was completed for a residential property with a couple areas of concern. The solution combined:
The ridgecaps needed sealing and coating, the box gutters required torch-on waterproofing, and the skylight area needed a stronger surface before the waterproofing system could be installed.
The flat area around the skylight was an important part of this project.
Approximately 20m² of the skylight roof area required new chipboards before waterproofing could begin. This was necessary because waterproofing over a weak, damaged, or unstable surface would not provide a long-term result.
A torch-on membrane performs best when the surface below it is stable, clean, and properly prepared. South African roof guidance standards also confirms that flat roof waterproofing should be installed by competent team and in line with manufacturer instructions.
Taylor Made Waterproofing proved its expertise in this project and offered the standard 10 year guarantee on this project.
Flat roof waterproofing often requires chipboard installation. If the existing board or substrate is weak, wet, uneven, or unstable, the waterproofing system can fail early even if the top layer looks correct.
See AfriSam’s Guide for more details.
Once the new chipboard surface was installed and prepared, TaylorMade Waterproofing applied a torch-on waterproofing Linden system over the flat skylight area.
Near the skylight area and box gutter the torch-on membrane is used to provide a durable waterproof barrier. The system was then finished with UV protective paint to reduce sun exposure and extend the lifespan of the waterproofing layer.
The ridgecaps were another important part of this roof waterproofing Linden project.
Ridgecaps sit along the highest points of a pitched roof. If the bedding, sealant, or coating deteriorates, water can enter beneath the roof covering and spread into the roof structure.
This helped protect the pitched roof areas from water ingress during heavy rain and changing weather conditions.
This roof waterproofing Linden project was completed in 1 day.
Because the work was clearly scoped, TaylorMade Waterproofing was able to complete multiple targeted waterproofing tasks in a short timeframe.
If your property has leaks around ridgecaps, skylights, box gutters, or flat roof sections, the issue should be assessed before the damage spreads.
This project shows how proper roof waterproofing Linden should be handled when different areas of the same roof require different solutions.
Send photos and approximate size for a faster, accurate response.
This project demonstrates the importance of treating the roof according to its actual problem areas. Ridgecaps, Box Gutters and Flat Roof Surfaces.
Instead of applying one generic coating across the roof, TaylorMade Waterproofing addressed each vulnerable section with the correct approach:
That is the difference between a temporary patch and a structured roof waterproofing system.
If your roof has already shown signs of leaking, the safest approach is not to wait. Water damage spreads through ceilings, boards, roof structures, and internal finishes over time.
Don’t wait for the next heavy rainfall to expose the same issue again.
Get a professional assessment and a waterproofing system designed for your roof.
Send photos and size for faster quote
This project focused on ridgecaps, box gutters, skylight-area board replacement and torch-on waterproofing.
Upload pictures for a faster quote!
